Supra/ Soarer

Upgrade your vehicle's performance with the FDF Adjustable SC300/400 Suspension Arms, designed to replace OEM arms. These arms integrate seamlessly and use an MK3 Factory ball joint (ball joint not included).

Key Features:

• On-Car Adjustability: Adjust both camber and caster settings directly on your vehicle.
• Extended Range of Adjustment: Broad adjustment ranges from the OEM length up to an additional 35mm.
• Durable & Reliable: Constructed from high-strength alloy steel.
• Motion Ratio Adjustment: Optimize your vehicle's handling; softening and stiffening your suspension without needing the change the spring rate.
• Comprehensive Hardware Kit: All required components included. 

Note: For custom colors, please list it within the order notes.

Note: Allow a 2-3 week build time.

Installation Manual

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.
  

New On-Car V2 Angle kit is currently in testing and will be releasing shortly. This will effect shipping times. 

The Mantis angle kit for the Supra/Soarer is the most relevant angle kit in today's drift society. 

Key Features:

• Angle: 70+ degrees.
• Ackermann: Anti/Pro Ackermann adjustable.
• Roll Center: 50mm Roll center adjustment.
• Bump steer: Minimal bump steer in drift by perfecting tie-rod pitch angle.
• Caster: Optimized caster for lead and trail wheel contact, with built-in trail to the knuckle adaptor.
• Camber: Optimized camber to counteract caster at full lock. 
• Track Width: Adjustable range from 50mm-75mm wider per side creating a stable and high clearance front end.
• Suspension Travel: Long travel range, full lock to lock at max droop and max compression.
• Joints: Chromoly 3-piece Heim joints and spherical bearings.
• Weight Reduction:  7075 aluminum and Alloy steel are used wherever possible for the lightest and strongest design.

Included:

• 2- mantis LCA
• 2- mantis UCA
• 2- inner tie rods 
  
• 2- knuckles adaptors
  
• 2- outer tie rods  

All hardware required for install included.

Note: For custom colors, please list it within the order notes. 

Note: Please allow 3-4 weeks of fabrication before the item is sent.

Installation Manual

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

A Rear Multilink is the solution for optimizing grip and fine-tuning alignment, allowing your car to achieve peak performance. Choose from the available options to get what you need for the rear of your car, all parts are constructed from alloy steel, and every arm is on-car adjustable.

Key Features:

• Alignment: Able to fine-tune alignment. 
• Durable & Reliable: Made out of alloy steel. 
  
• Adjustability: All arms are on-car adjustable. 

Note: Please allow 2-4 weeks of fabrication time.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.
  

Built to turn heads and handle the elements, our FDF "Mantis Angle" fender sticker is made of high-quality materials. Its precision design and perfect sizing let you proudly display your FDF allegiance, adding a clean, professional look that’s as durable as the parts we stand behind.

Note: Product is sold in pairs, and is a universal fit. 

Limited Quantities Available – Order Yours Today!

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.

• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.

• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

The Universal Spline Sway Bar Kit simplifies the process of creating a custom sway bar for your car. With this kit, you'll have everything you need to construct a custom sway bar, from start to finish.
We offer a range of options to choose from for blade length and link inclusion. 

For a visual demonstration of how our kit can be utilized in your build, we encourage you to check out our video link, showcasing how we used the FDF Sway Bar Kit in our C6 Corvette build.

Key Features:

• All-In-One Kit: Equipped with all essential parts, this kit provides everything you need to construct a high-performance sway bar. 
• Customizable Options: Different length options. 
• Durable and Reliable: Made out of high alloy steel. 

Included:

• 2 Female spline ends
• 2 Male Spline ends
• 4 locking bolts
• 2 blades (6",8" or 10")
• Sway bar link kit (optional)

Need to purchase parts:

• 2 Bushings 
• Sway bar material (4130 1.25x.120 tubing)
• Housing material (DOM or 4130 1.75 x .120 tubing)

Note: Please allow 2-3 weeks for shipping 

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.