TOYOTA SOARER/LEXUS SC300/400 ADJUSTABLE FRONT CONTROL ARMS
Introducing the FDF Adjustable SC300/400 Suspension Arms: The Ultimate Upgrade
Upgrade your vehicle's performance with the FDF Adjustable SC300/400 Suspension Arms, designed to replace OEM arms while offering superior strength and versatility. Crafted with precision and care entirely in-house, these arms integrate seamlessly and use an MK3 Factory ball joint (ball joint not included).
Key Features:
On-Car Adjustability: Effortlessly adjust both camber and caster settings directly on your vehicle, without the need to detach the arm or manipulate heim joints. This feature provides unparalleled convenience and precision, making fine-tuning your alignment easier than ever.
Extended Range of Adjustment: Enjoy a broad adjustment range from the OEM length up to an additional 35mm, allowing for greater customization and control over your vehicle's handling.
Robust Construction: Constructed from high-strength alloy steel, these arms are built to last under the toughest conditions.
Motion Ratio Adjustment: Optimize your vehicle's handling with adjustable motion ratios, softening and stiffening your suspension without needing the change the spring rate.
Comprehensive Hardware Kit: Each set of suspension arms comes complete with all necessary hardware for installation, ensuring a hassle-free setup.
Spare Parts Availability: All components of the FDF Adjustable SC300/400 Suspension Arms are available for individual order through our dedicated spare parts section, providing easy access to replacements as needed.
Allow a 2-3 week build time
Toyota Supra/Soarer Mantis Angle Kit
New On-Car V2 Angle kit is currently in testing and will be releasing shortly. This will effect shipping times.
The Mantis angle kit for the Supra/Soarer is the most relevant angle kit in today's drift society, and here's why:
-Angle, 70+ degrees
-Ackerman, Anti/Pro ackerman adjustable
-Roll Center, 50mm Roll center adjustment
-Bump steer, minimal bump steer in drift by perfecting tie-rod pitch angle
-Caster, optimized caster for lead and trail wheel contact, with built in trail to the knuckle adaptor
-Camber, optimized camber at to counteract caster at full lock.
-Track Width, adjustable range from 50mm-75mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to lock at max droop and max compression
-Joints, Chromoly 3 piece Heim joints and spherical bearings
-Weight Reduction, 7075 aluminum and Alloy steel used wherever possible for the lightest and strongest design.
Full kit
2- mantis LCA
2- mantis UCA
2- inner tie rods
2- knuckles adaptors
2- outer tie rods
All hardware required for install included.
Please allow 3-4 weeks of fabrication before the item is sent.
Toyota Soarer Lexus/SC300 Rear Multilink
Choose from the available options to get what you need for the rear of your car, all parts are constructed from alloy steel, every arm is on-car adjustable (meaning you do not need to remove any bolts to lengthen or shorten the arms).
This is the best way to dial in grip and correct the alignment for the best performance your car is capable of.
Select through the options to see the photo of each arm set
Please allow 2-4 weeks of fabrication time
Universal Spline Sway Bar Kit
Introducing the FDF Sway Bar Kit, an innovative solution that simplifies the process of creating a custom sway bar for your race car. Our kit features precision-machined components, meticulously crafted in-house to ensure superior quality and performance. With this comprehensive kit at your disposal, you'll have everything you need to construct a custom sway bar, from start to finish.
The FDF Sway Bar Kit includes all the complex parts required to build a top-of-the-line sway bar, along with convenient links to help you source any additional materials you may require. Whether you prefer to purchase materials locally or through the McMaster-Carr website, we've got you covered.
To further assist you in customizing your sway bar, we offer a range of options to choose from. Simply refer to the detailed information provided below and select the options that best meet your specific needs.
For a visual demonstration of how our kit can be utilized in your build, we encourage you to check out our video link, showcasing how we used the FDF Sway Bar Kit in our C6 Corvette build.
Invest in the FDF Sway Bar Kit and take your race car to the next level of performance and precision.
Included Parts
-2 Female spline ends
- 2 Male Spline ends
- 4 locking bolts
- 2 blades (6",8" or 10")
Optional
-sway bar link kit
Need to purchase parts
- sway bar material (4130 1.25x.120 tubing)
- housing material (DOM or 4130 1.75 x .120 tubing)
Please allow 2-3 weeks for shipping
Mantis Angle Fender Sticker
-Comes in pair
-Universal fit
-High quality wrap sticker