The Nissan S13/S14/S15 Mantis Angle kit is engineered for optimal handling performance while drifting. It features fully fabricated knuckles and arms constructed from high-strength alloy using a tab-and-slot design, ensuring robust welds and connections among all components. Additionally, the kit is designed to be on-car adjustable, allowing all adjustments for caster, camber, and toe to be made without removing any parts.
Key Features:
Adjustability:Our innovative lower control arm design introduces on-car fine-tuning for caster and camber.
Angle:70+ degrees depending on your steering rack setup.
Ackermann: Adjustable Ackermann.
Roll Center: Optimized handling by adding 50mm of roll center correction.
Bump steer: Minimal bump steer in drift by perfecting tie-rod pickup location.
Caster:Displaced caster built into the knuckle for optimal alignment force.
Camber: Optimized camber ranging from adjustable from -3 to -6.
Track Width:50-75mm wider per side creating a stable and high clearance front end. (Recommend front over fenders).
Suspension Travel: Long travel range, full lock to full lock at any point throughout suspension travel for increased grip.
Joints: Chromoly Heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable.
Durable & Reliable: High Strength Alloy Steel and Aluminum is used throughout all components.
Choose the options according to your preferences or send us an email if you need help deciding sales@fdfraceshop.com.
Included:
2 lower control arms
2 knuckles- Ackerman Plates
2 inner and outer tie-rods
2 caster/camber plates
FDF updates to the kit include:
1 piece LCA with on-car adjustment at all points
Uniball bearing on the outer ball joint
Knuckle with interchangeable spacers to use on s13/14/15 coilovers
Integrated bump stop on the knuckle for fine-tuning your angle limit
All hardware required for install included.
Note: Must have coilovers to run this kit.
Note: Wheel bearing not included.
Note: If you choose to run the Z32 caliper with the 350Z bearing option, the caliper may require some minor grinding to clear the bearing due to its size.
Note: For custom colors, choose one from Prismatic Powders. Please list the item code and name within the order notes.
Note: Please allow 3-4 weeks of fabrication before the item is sent.
