Products

The FDF C5/C6 conversion is a transfer drill plate that is easily bolted to the factory wheel bearing and provides transfer holes for a 14mm drill bit. This is the size required to press in new ARP wheel studs. It is recommended that a shop do this and at a minimum, use a drill press to ensure that the holes are perpendicular to the bearings mounting face. The studs that work well for this install are ARP-100-7717 and can be purchased on Summit Racing. The plate can come with a 14mm drill bit if selected. 

Key Features:

• Transfer Holes: Sized for a 14mm drill bit. (Drill bit can be included if selected.)
• Wheel Studs: Requires new ARP wheel studs to be pressed in. 
• Durable, Reliable & Lightweight: Made out of high-strength aluminum. 

Note: Please allow 2-3 weeks before shipping. 

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
  
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

The Toyota 86/Scion FRS/Subaru BRZ Mega Mantis Angle Kit is engineered for optimal handling performance while drifting. It features fully fabricated knuckles and arms constructed from high-strength alloy using a tab-and-slot design, ensuring robust welds and connections among all components. Additionally, the kit is designed to be on-car adjustable, allowing all adjustments for caster, camber, and toe to be made without removing any parts.

Key Features:

• Angle: Up to 65 degrees depending on your steering rack type, location, and wheel size.
• Tie-rods: The kit includes adjustable offset rack spacers, with inner and outer Heim joints. 
• Ackermann: Adjustable Ackermann.
• Roll Center: 50mm of roll center correction.
• Bump Steer: Minimal bump steer in drift by perfecting tie-rod pitch angle. 
• Caster: Reduced caster. 
• Camber: Customizable camber ranging from -3 to -6.
• Track Width: 50-75mm wider per side.
• Suspension Travel: Full lock-to-lock at any point throughout the suspension travel for increased grip.
• Joints: Chromoly heim joints and spherical bearings. 
• Durable, Reliable & Lightweight: Made from High strength alloy steel and Aluminum

Customizable Options:

• Opt for with or without caster plate options for further camber, caster, and track width adjustments.
• Upgrade to the inner tie rod/offset rack spacer for superior geometry and angle potential.

Note: If opting for the inner tie rod upgrade, some subframe modifications involving minor cutting and welding are necessary to ensure proper clearance.

Note: Wheel Bearing not included

Note: For custom colors, please list it within the order notes. 

Note: Please allow 3-4 weeks for build time

Installation Manual

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.
  

These Adjustable links are a high quality Chromoly female and male rod end. They are length adjustable and a universal way to connect your sway. Adjustable sway bar links are also used to load one side of the car vs another, this can be beneficial when corner balancing a car, or setting up your car to handle different tracks. They use m12 hardware (bolts and nuts). The length range is from 3.3" - 4.4" center of bearing to center of bearing.

Key Features:

• Durable & Reliable: Made out of high quality Chromoly female and male rod ends.
• Adjustability: Length adjustable. 
• Use: Universal way to connect swat OR load one side of the car vs another. 
• Hardware: Uses m12 hardware (bolts & nuts). 
• Length: Ranges from 3.3" - 4.4" center of bearing to center of bearing.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

Built to turn heads and handle the elements, our FDF "Mantis Angle" fender sticker is made of high-quality materials. Its precision design and perfect sizing let you proudly display your FDF allegiance, adding a clean, professional look that’s as durable as the parts we stand behind.

Note: Product is sold in pairs, and is a universal fit. 

Limited Quantities Available – Order Yours Today!

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.

• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.

• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

Corvette C5/C6 Rear Upper Arms, features 250ksi yield strength alloy steel, tig welded and powder coated to prevent corrosion and provide a durable finish. Our exclusive chromoly locking bungs allow for easy adjustment and secure locking to prevent from coming loose under hard driving. 

Custom 3 piece Rod Ends feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminates bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. 

Note: Sold as a pair. 

Key Features:

• Durable, Reliable & Lightweight: Made out of high-strength alloy steel; uses stainless steel misalignment spacers, chromoly locking threads, and chromoly performance rod ends. 
• Adjustability: Easily adjustable and securely locks for hard driving. 
• Rod Ends: 3 piece Teflon rod ends provide quiet operation, low friction, smooth articulation, and eliminates bushing deflection under load.
• Compatibility: OEM fit for C5/C6 (not Z06). 

Note: For custom colors, list it within the order notes.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

The Nissan 350Z/G35 upper control arms are fully adjustable. They feature a simple and robust design, and adjustments are easy with a Heim joint on both ends. These arms are made from structural steel and chromoly, with chromoly 3-piece rod ends.

Key Features:

• Durable & Reliable: Made from high-strength alloy steel. 
• Adjustability: On-car adjustable. 
• Camber: + and - camber adjustment range.

Note: For custom colors, please list it within the order notes.

Note: Please allow 2-3weeks of fabrication before the item is sent.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

Our Front Lower Control Arms for C5/C6/C7 are a low profile, high clearance design that up to for 70 degrees of wheel lock. They bolt to factory knuckles or FDF mega mantis knuckles. The arms feature on car adjustment for both camber and caster, meaning you do not need to disconnect the lower control arm to align the car. 

The arms feature an OEM style mounting point for any Coilover to fasten to, with 3-position, motion ratio adjustment, each adjustment adding 8% increase or decrease in stiffness to fine-tune your suspension.  This product is not intended for factory leaf springs/shocks. The arms are constructed from high-strength alloy steel, and use spherical bearings with locking collars to keep everything tight while in use. The arms include all of the required hardware to bolt on and go.

Key Features:

• Durable, Reliable & Lightweight: Made out of high-strength alloy steel. 
• Adjustability: On-car adjustment for camber and caster. 
• Mounting: Uses OEM mounting point for coilover fastening. 
• Knuckles: Bolt to factory or FDF Mega Mantis knuckles. 
• Clearance: High clearance with up to 70 degrees of wheel lock. 

Note: For custom colors, please list it within the order notes.

Installation Manual

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

 With a straight-forward installation process and compatibility with multiple setups, the FDF Steering Column Kit is engineered for seamless control and ultimate durability.  The FDF steering column kit will bolt to any 1.5 inch roll cage tubing.

Key Features:

• Compatibility: Can adapt to multiple set-ups; bolting to any 1.5 inch roll cage tubing. 
• Durable & Reliable: Made out of lasting materials. 

Includes:

• 44" of steering shaft
• 1 column mount
• 1 sweet u-joint
• 1 firewall bearing
• 1 quick release (Optional)

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

The FDF inline rack adaptor is the ideal solution for your tie rod setup, this product consists of 2 billet shackles that bolt to your steering rack and allow for a 5/8-18 rod end to be used as the inner ball joint.

Key Features:

• Tie Rod: Replaces socket style tie rod with a double shear Heim joint design, this is both easier to service and lasts much longer through heavy abuse.
• Shackle: Takes all the abuse you can throw at your car. Machined from a billet piece of Chromoly and electro-plated.
• Sizing: Fits a 5/8-18 rod end to be used as the inner ball joint.

Add On:

• 2 m16x1 Allen head bolts for any s-chassis, r-chassis, and z-chassis 
• 2 m16x1.5 Allen head for frs/brz
• 2 inner tie-rod heim joints with jam nuts

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

The Ford Mustang S197 Mantis Angle Kit is engineered for optimal handling performance while drifting. It features fully fabricated knuckles and arms constructed from high-strength alloy using a tab-and-slot design, ensuring robust welds and connections among all components. Additionally, the kit is designed to be on-car adjustable, allowing all adjustments for caster, camber, and toe to be made without removing any parts.

Key Features:

• Angle: 65+ degrees.
• Ackermann: Anti/Pro Ackermann adjustable.
• Roll Center: 50mm Roll center adjustment.
• Bump steer: Minimal bump steer in drift by perfecting tie-rod pitch angle.
• Caster: Optimized caster for lead and trail wheel contact, with built-in trail to the knuckle, optional Caster plates to perfect self-steer, and front tire contact at lock.
• Camber: Optimized camber to counteract caster at full lock. 
• Track Width: Adjustable range from 50mm-75mm wider per side creating a stable and high clearance front end.
• Suspension Travel: Long travel range, full lock to lock at max droop and max compression.
• Joints: Chromoly 3 piece Heim joints and spherical bearings.
• Durable, Reliable & Lightweight: Made from High strength alloy steel and Aluminum.

Note: For custom colors, list it within the order notes. 

Note: Please allow 2-3 weeks of fabrication before the item is shipped.

Installation Manual

A Rear Multilink is the solution for optimizing grip and fine-tuning alignment, allowing your car to achieve peak performance. Choose from the available options to get what you need for the rear of your car, all parts are constructed from alloy steel, and every arm is on-car adjustable.

Key Features:

• Alignment: Able to fine-tune alignment. 
• Durable & Reliable: Made out of alloy steel. 
  
• Adjustability: All arms are on-car adjustable. 

Note: Please allow 2-4 weeks of fabrication time.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.
  

The Mazda Rx7 FC Mantis Angle Kit is engineered for optimal handling performance while drifting. It features fully fabricated knuckles and arms constructed from high-strength alloy using a tab-and-slot design, ensuring robust welds and connections among all components. Additionally, the kit is designed to be on-car adjustable, allowing all adjustments for caster, camber, and toe to be made without removing any parts.

Key Features: 

• Angle: 70 degrees depending on your wheel size and offset.
• Ackermann: Adjustable Ackermann.
• Roll Center: Optimized handling by adding 40mm of roll center correction.
• Bump steer: Minimal bump steer in drift by perfecting tie-rod pitch angle.
• Caster: Added trail and reduced caster which adds more grip by increasing tire contact patch, causes less bump steer, less jacking from lock to lock, increased transition speed, and effortless transition while on throttle.
• Camber: Optimized camber ranging from -3 to -6.
• Track Width: 50-70mm wider per side creating a stable and high clearance front end.
• Suspension Travel: Long travel range, full lock to full lock at any point throughout suspension travel for increased grip.
• Joints: Chromoly Heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable.
• Durable, Reliable & Lightweight: Made from High strength alloy steel and Aluminum. 

Note: Wheel Bearing not included.

Note: For custom colors, please list it within the order notes. 

Note: Please allow 3-4 weeks for fabrication before the item is sent.
2 weeks waiting time added for custom color.

Installation Manual

During regular alignment work, adjustments are made from the tie rods without first centering the steering rack. This ensures even lengths of the rack are exposed but makes the process more time-consuming for the technician. If the rack is off-center when adjusting the tie rods, your steering won't turn equally in both directions and will have an uneven turning radius. A centered steering rack also prevents handling problems like uneven bump steer and inconsistent steering resistance.

With the steering rack centering tool, you can ensure the rack is centered every time you do an alignment. This saves time during quick checks after a day on the track or street. When the rack is centered for each alignment, the steering wheel stays in the same position, eliminating the need to reset it. Without this tool, every time you adjust the tie rod, the steering rack moves, requiring you to recheck all alignment settings and set up the alignment equipment again.

Simplify your alignment process and ensure consistent steering with the FDF Steering Rack Centering Tool.

Note: Centering tool needs to be used with OEM inner tierod end to work. The tool needs a flat service to center correctly.

Key Features:

• Precision Engineering: The FDF Steering Rack Centering Tool is 3D-printed for accurate fitment and durability.
  
• User-Friendly Design: Easily slides onto the rack, ensuring a tight and secure fit without falling off.
  
• Comprehensive Kit: Comes with a detailed manual to guide you through each step of the centering process.

Didn't find your chassis on the list? Get in touch with us at support@fdfraceshop.com and we'll craft a design just for you!

Installation Manual

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

View this post on Instagram

A post shared by FDF Race Shop inc. (@fdfraceshop)

Improve your driving experience with our BMW E46 Heel Plates, designed specifically for left-hand drive vehicles. These plates not only cover the large gully on both sides of your car, but they also provide superior grip, ensuring you maintain control during every turn. Crafted from durable 6061 aluminum, these heel plates are built to last without the need for additional painting or coating, giving your interior a sleek, polished look.

Key Features:

• Features: Left-hand drive plates that cover the gully on both sides of the car. 
• Grip: High level of grip for control. 
• Durable & Reliable: Made from 6061 aluminum. 

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
  
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

The FDF 370Z/G37 Diff Brace is the most relevant product available for stabilizing the rear end of the Z/G chassis because it increases rigidity between the toe arms. This brace ties the rear subframe into the Differential creating a "solid mount" for the rear diff, this is essential to prevent chatter under heavy acceleration, drifting, or hard driving. This brace includes a jack point in the center of the vehicle giving you a balanced point to use while changing tires or lifting the car onto stands from the rear. 

The kit will include all of the hardware required to install, and install time is approximately 30 minutes.

Key Features: 

• Enhanced Stability: Increases rear-end stability.
• Prevention of Differential Chatter: Secures the differential, and the brace minimizes chatter and unwanted movement.
• Jack Point: Includes a central jack point.
• Quick Install Time: Approximate time is only 30 minutes.

Note: On the 370z you will need to remove the 2 brace bars that connect the center of the subframe to the rear corners of the chassis. These will interfere with the diff brace 

Note: For custom colors, please list it within the order notes.

Note: Please allow 1-2 weeks for fabrication and shipping/ handling before this product ships.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

Our rear 350Z/G35 Toe arms are designed and manufactured in-house using CNC-machined Aluminum bodies, thick steel shackles, heavy-duty Heim joints, and an anodized protective finish

Key Features:

• Durable & Reliable: Made out of lightweight Alloy construction, and Teflon-lined rod ends.
  
• Spacers: Stainless Steel misalignment spacers.
• Rod Ends: Low Friction 3 Piece Teflon Lined Rod Ends.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

We are offering misalignment spacers for Heim joints/rod ends/rose joints. 

(HM) = High Misalignment 

(NH) = Not High Misalignment

(SS) = Stainless Steel

(AL) = Aluminum

We machine these from stainless steel and aluminum for all of our products and have a large inventory of spacers in various sizes. 

Note: The price is per pair of spacers (2) because for any application you will need 1 spacer on either side of the heim joint. 

Key Features: 

• Heim Joint Size is the size of the heim joint the spacer is meant to fit into. 
• Hole Size is the hole size for the bolt to go through the spacer. 
• Width Per Spacer is the measurement from shoulder to shoulder of one spacer. 
• Overall Width is 2 of the same spacers in the Heim joint. 

Custom Order:

If none of the options work for you, we can do custom spacers but lead time is 3-4 weeks and a minimum purchase order is required. If you are looking for custom measurements, please email us at support@fdfraceshop.com before ordering.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

Our 350z knuckle adaptor makes use of 3 available points on the knuckle, to relocate where the outer tie rod connects and allows for the Ackermann to be adjusted in multiple different positions from positive to negative, simply and efficiently without removing any hardware (only loosening) in under 1 minute. This adaptor can also be used with any control arms available, including OEM gktech and parts shop max; giving you the adjustability you need even with different control arms. 

To adapt this to your FDF Kit, you will only need the adaptor bracket (unless you want to add the other options for replacements or spares).

To adapt this to other angle kits you will need the outer rod end AND the tierod adaptor.

Key Features:

• Angle: 65 degrees (depending on control arm setup)
• Ackermann: +2 degrees to -2 degrees of Ackerman (and everything in between) when measured at full lock.
• Bump steer: Corrected by perfecting tie-rod offset LCA ball joint.
• Caster: Factory caster when using stock UCA or adjustable caster when paired with FDF UCA.
• Camber: Optimized camber at -5.5 to counteract caster at full lock. 
• Track Width: Adjustable range from 25mm-50mm wider per side creating a stable and high clearance front end.
• Suspension Travel: Long travel range, full lock to full lock at any point throughout suspension travel.
• Joints: Chromoly heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable 
• Durable, Reliable & Lightweight: Made from High strength alloy steel and Aluminum.

Note: Please allow 2 weeks build time for this product 

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

Improve your driving experience with our BMW E36 Heel Plates, designed specifically for left-hand drive vehicles. These plates not only cover the large gully on both sides of your car, but they also provide superior grip, ensuring you maintain control during every turn. Crafted from durable 6061 aluminum, these heel plates are built to last without the need for additional painting or coating, giving your interior a sleek, polished look.

Key Features:

• Durable & Reliable: Made out of 6061 aluminum. 
  
• Use: Covers gully on both sides of the car and provides extra grip. 

Note: For convertibles, the heel plates do not fit and require some trimming due to the extra reinforcing done on the chassis

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
  
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.
  

Our rear camber arms are designed using aluminum bodies, ensuring superior strength and precision. The construction is complemented by thick steel shackles and heavy-duty Heim joints.

Key Features:

• Durable, Reliable & Lightweight: Made out of lightweight Alloy construction, and Teflon-lined rod ends.
• Joints: Uses heavy-duty Heim joints.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

These arms are used to adjust your toe, primarily used when lowering the car (or lifting). They feature a very strong and lightweight, alloy construction. 

This product includes 2 arms, and all required hardware to install. 

Key Features:

• Adjustable: Able to adjust toe using a Left and right hand threaded body
• Durable, Lightweight, & Reliable: Made out of high-strength alloy Aluminum

Arms will also fit:

• 2013+ Scion FRS
• 2013+ Subaru BRZ
• 2010-2014 Subaru Legacy Outback
• 2010-2014 Subaru Legacy Sedan B4
• 2010-2014 Subaru Legacy Outback
• 2011+ Subaru Impreza XV Crosstrek
• 2008-2014 Subaru Impreza WRX
• 2008-2014 Subaru WRX STi Hatchback
• 2008-2014 Subaru WRX STi Sedan

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.
  

This is a fully adjustable 4-position toe gain/bump steer correction bracket that comes with a new set of 7075 aluminum toe arms, and all the hardware required to install and adjust for your level of grip.

Key Features:

• Adjustability: Fully adjustable 4-position toe gain. 
  
• Durable & Reliable: Made out of alloy steel.
• Hardware: Comes with toe arms brackets and optional solid bushing and all the hardware required for install. 

Note: This kit MUST be used with a Bearing/ Solid Bushing and can not be run with the OEM toe arm bushing in the knuckle.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

Our Rear Mid Link is fully adjustable and is easy to install. This spring arm is ideal for bagged setups and lowered cars retaining factory-style coils that require more adjustment.

Key Features:

• Adjustability: Fully adjustable 350Z/G35 or 370Z/G37 Rear Mid Link (Spring Arm).
  
• Set-Up: Ideal for bagged setups and lowered cars.
• Install: Easy & quick install.

Note: For custom colors, please list it within the order notes.

Note: Please allow 2-3 weeks for fabrication.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

The FK rod end bearings are the premium option for our angle kits that offer superior bearing life, extreme strength, and a smooth feel.

Options: 

• We offer them in 2 sizes, both left-hand (LH) and right-hand (RH).
• The JMX10 is a PTFE lined 5/8-18 bearing with a yield strength of 17,959 lbs.
• The JMX12 is a PTFE lined 3/4-16 bearing with a yield strength of 28,090 lbs.

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

The FDF Dual Caliper Bracket is made from billet aluminum, and it offers a direct fit. Designed to allow independent control of rear brakes, and built for the demands of track and drift enthusiasts. Compatible with Z32 dual piston caliper and stock Z32 rotor (same as R32,R33,R34, and JDM S14/S15). Comes with all the hardware required for install.

Key Features:

• Durable & Reliable: Made out of Billet Aluminum. 
  
• Braking: Enhances braking and allows independent control of rear brakes. 
• Compatibility: Compatible with Z32 dual-piston caliper and stock Z32 rotor (same as R32,R33,R34, and JDM S14/S15).

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.

These arms are used to adjust your camber beyond what the factory camber bolt can do, primarily used when lowering the car (or lifting). These arms feature a very strong and lightweight, alloy steel construction with options for softer/stiffer suspension points and sway bar points. 

This product includes 2 arms, and all required hardware to install. 

Key Features:

• Durable, Lightweight & Reliable: Made out of high-strength alloy steel. 
• Camber: Adjustable camber past the factory camber bolt ability. 

The arms will also fit:

• 2013+ Scion FRS
• 2013+ Subaru BRZ
• 2010-2014 Subaru Legacy Outback
• 2010-2014 Subaru Legacy Sedan B4
• 2010-2014 Subaru Legacy Outback
• 2011+ Subaru Impreza XV Crosstrek
• 2008-2017 Subaru Impreza WRX
• 2008-2014 Subaru WRX STi Hatchback
• 2008-2014 Subaru WRX STi Sedan

Note: For custom colors, please list it within the order notes. 

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.
  

The FDF hydro mount plate for the Ford Mustang S197 fits from 2005-2014, and bolts directly to available holes on the transmission tunnel surrounding the shifter. It comes with pre made holes that line up with most aftermarket handbrakes and puts the handbrake in the perfect position for easy pulling while drifting.

Key Features:

• Compatibility: Fits 2005-2014 Ford Mustang S197. 
• Positioning: Comes with pre-made holes that bolt directly to available holes on transmission tunnel; positioning perfectly for pulling during drifting. 

Why Choose FDF?

• Driver-inspired designs: Our products feature innovative, driver-inspired designs tailored for performance and style.
• High-quality materials: We use only high-strength alloys to ensure the durability and superior quality of our products.
• Made in North America: Our products are proudly made in-house in North America, ensuring exceptional craftsmanship and reliability.